2012 Spring Live Seminar Schedule

 

Structural Steel and
 Bolting Inspection
 

Plan Reading for
 Steel Construction
Structural Welding Inspection Inspection of Seismic
Steel Frames
8:00 am - 5:00 pm 6:30 pm - 9:00 pm 8:00 am - 5:00 pm 8:00 am - 5:00 pm
Garden Grove, CA April 24 April 24 April 25 April 26
Rockville Centre, NY May 1 May 1 May 2 not offered
Note: Because of a very heavy schedule this coming Spring, these are the only two cities where live seminars are being planned. We will be scheduling webinars on each of these topics for the Spring season.

Structural Steel and Bolting Inspection
an eight-hour seminar on the inspection of steel-framed buildings under the AISC Specification for Structural Steel Buildings, the AISC Code of Standard Practice, and the International Building Code, and on the inspection of high-strength bolted joints under the RCSC Specification for Structural Joints Using High-Strength Bolts

Plan Reading for Steel Construction
a 2.5 -hour seminar on the use and understanding of typical structural design, erection and shop drawings for steel-framed buildings

Structural Welding Inspection
an eight-hour seminar on the inspection of welding under the American Welding Society's Structural Welding Codes:
AWS D1.1 - Steel,
AWS D1.3 - Sheet Steel, and
AWS D1.4 - Reinforcing Steel

Inspection of Seismic Steel Frames
an eight-hour seminar on the construction and inspection of connections in steel buildings under the 2005 and 2010 AISC Seismic Provisions for Structural Steel Buildings,  the AISC 358 Prequalified Moment Connection standard, and the AWS D1.8 Structural Welding Code - Seismic Supplement, with ties to previous FEMA 353 recommendations


ICC Certified Special Inspectors and other ICC Certified Code Safety Professionals: These seminars are being conducted in cooperation with the International Code Council. All SSTC seminars listed are approved for ICC certification renewals.

AWS Certified Welding Inspectors and Senior Certified Welding Inspectors: The seminars are recognized for continuing education credit under Clause 16 of AWS QC1:2007, Standard for AWS Certification of Welding Inspectors.

Professional Engineers and Structural Engineers: Seminars are recognized by all states as a means to satisfy continuing education requirements. SSTC seminars on Structural Steel and  Bolting Inspection (PS003375) and Structural Welding Inspection (PS003339) are specifically approved for New York State PE Professional Development Hours credit, through the Practicing Institute of Engineering, Inc.

Seminars Contact Hours Continuing Education Units Professional Development Hours
Structural Steel and  Bolting Inspection  8.0 0.80 8.0
Plan Reading for  Steel Construction 2.5 0.25 2.5
Structural Welding Inspection 8.0 0.80 8.0
Inspection of Seismic Steel Frames 8.0 0.80 8.0